Clutch accessories

Fits all ZF-transmissions, suited for Tenaci 184 mm clutch with the smaller diaphrame spring (t11185914)The spacers that can be included allows you to install the bearing with correct distance to the diaphrame spring.Spacer sizes: 4x 5mm, 4x 10mm 4x 20mm

Tenaci hoses for clutch release bearings. Sold as a pair.

For 184, 200 or 240 mm clutchesMake sure that you use the correct clutch cylinder so the release bearing doesn't get overfilled. This could lead to oil leaking on the rubber rings which would wear out the bearing. You could use 0,65" but 0,75"...

Fits Tenaci, Tilton, ACE Racing, Quartermaster and Sachs clutches.Bearing depth 65 mm. Adapterplate 10 mm. Spacers 5,15 / 10,15 / 20,15 mm.(Can be used for ZF-transmission if you remove the socket which the bearing slides on.  )Make sure that you use the correct clutch...

Material: metal

4,5 mm middle floater which is used for 200 mm Tenaci clutches with 2 or 3 discs.

Replaces original pipe with a new one.This is an adjustable bearing that is locked with a key that can be included. (t02811112)Make sure that you use the correct clutch cylinder so the release bearing doesn't get overfilled. This could lead to oil leaking on...

Fits both ZF and Getrag transmissions with ø28,6 mm input shaft and 10 splines. Example E30, E34, E36, E39 and more.Features Koyo bearings inside.This bearing can not be used with 184 mm clutches as it is too large.

Top floater which fits Tenaci 200 mm clutchesWorks with both 1 and 2 disc clutch.Tenaci Clutch Discs can be used with this top floater.

Material: metall

Material: metall

Material: metal

Material: metal

4,5 mm middle floater which is used for 184 mm Tenaci / Tilton cluth discs.

4,5 mm middle floater which is used for 240 mm Tenaci clutches with 2 or 3 discs.

   

Top floater which fits Tilton Clutches.Important: Only fits clutch covers with nut on the top-side which tightens the clutch diaphragm spring.Tenaci Clutch Discs can be used with this top floater.

Tenaci lamellnav BMW, 26 splines, 35mm axel, för 530d 6 växlad.Obs endast avsedd för 184-200mm kopplingFits with Tenaci release bearing t51231032

Tenaci legs for pressure plate 3-disc - 200 mm 6 x Clutch legs with 12 x guide pin screws

1-step HD release bearing for ZF with 35 mm shaft for 240 mm Tenaci "black & Sachs 243 clutch Fits Sachs 765, 243, 618 and Tenaci "black" Does not fit Tenaci "performance" clutches! Fits ZF gearboxes with ø35 mm input shaft and 10, 22...

Rivet for installing Tenaci clutch discs sizes 184/200 mm with Tenaci hubs. 6,1*7,6mm Sold separately

Fits clutch disc from 184-200mm

Fits clutch disc from 215-240mm

Fits clutch disc from 215-240mm