Release bearing & accessories

Fits Tenaci, Tilton, ACE Racing, Quartermaster and Sachs clutches.Bearing depth 65 mm.(Can be used for ZF-transmission if you remove the socket which the bearing slides on.  )Make sure that you use the correct clutch cylinder so the release bearing doesn't get overfilled. This could...

Fits Tenaci, Tilton, ACE Racing, Quartermaster and Sachs clutches.Bearing depth 65 mm(Can be used for ZF-transmission if you remove the socket which the bearing slides on.  )Make sure that you use the correct clutch cylinder so the release bearing doesn't get overfilled. This could...

Fits only Tenaci "performance" clutch Bearing depth 65 mm(Can be used for ZF-transmission if you remove the socket which the bearing slides on.  )Make sure that you use the correct clutch cylinder so the release bearing doesn't get overfilled. This could lead to oil...

Tenaci release bearing 2-step for BMW 35 mm axle2-steps for adjusting bearing to diaframe springSachs oe nr : 3151 001 090Fits :Fits this 6 speed gearboxesBMW N54 ZF GS6-53BZ JGK 135BMW M57N ZF GS6-53DZ HGA E46 330DBMW N55 ZF GS6-45BZ THD4 135i 335i 535iBMW...

Replaces original pipe with a new one.This is an adjustable bearing that is locked with a key that can be included. (t02811112)Make sure that you use the correct clutch cylinder so the release bearing doesn't get overfilled. This could lead to oil leaking on...

Replaces original pipe with a new one.Make sure that you use the correct clutch cylinder so the release bearing doesn't get overfilled. This could lead to oil leaking on the rubber rings which would wear out the bearing. You could use 0,65" but 0,75"...

For 184, 200 or 240 mm clutchesMake sure that you use the correct clutch cylinder so the release bearing doesn't get overfilled. This could lead to oil leaking on the rubber rings which would wear out the bearing. You could use 0,65" but 0,75"...

Fits only Tenaci "performance" clutch Bearing depth 65 mm. Adapterplate 10 mm. Spacers 5,15 / 10,15 / 20,15 mm.(Can be used for ZF-transmission if you remove the socket which the bearing slides on.  )Make sure that you use the correct clutch cylinder so the...

For 184, 200 or 240 mm clutchesMake sure that you use the correct clutch cylinder so the release bearing doesn't get overfilled. This could lead to oil leaking on the rubber rings which would wear out the bearing. You could use 0,65" but 0,75"...

Total height : 60 mmSome ZF-transmissions may require that you grind the adapter plate as there is an edge on the transmission that collides with the adapter.Make sure that you use the correct clutch cylinder so the release bearing doesn't get overfilled. This could...

Fits Tenaci, Tilton, ACE Racing, Quartermaster and Sachs clutches.Bearing depth 65 mm. Adapterplate 10 mm. Spacers 5,15 / 10,15 / 20,15 mm.(Can be used for ZF-transmission if you remove the socket which the bearing slides on.  )Make sure that you use the correct clutch...

Total height : 60 mmSome ZF-transmissions may require that you grind the adapter plate as there is an edge on the transmission that collides with the adapter.Make sure that you use the correct clutch cylinder so the release bearing doesn't get overfilled. This could...

https://youtu.be/0mXoUBUqQaY

Fitting this tool on transmissions allows you to adjust the clutch arm.

THE PIPE MAY NEED TO BE SHORTENED If you have problem with adjusting the bearing you can install our smart adjusting device (t00123658)

If you have problem with adjusting the bearing you can install our smart adjusting device (t00123658)

Tenaci hoses for clutch release bearings. Sold as a pair.

For 184, 200 or 240 mm clutchesMake sure that you use the correct clutch cylinder so the release bearing doesn't get overfilled. This could lead to oil leaking on the rubber rings which would wear out the bearing. You could use 0,65" but 0,75"...

Fits Tenaci, Tilton, ACE Racing, Quartermaster and Sachs clutches.Bearing depth 65 mm. Adapterplate 10 mm. Spacers 5,15 / 10,15 / 20,15 mm.(Can be used for ZF-transmission if you remove the socket which the bearing slides on.  )Make sure that you use the correct clutch...

Replaces original pipe with a new one.This is an adjustable bearing that is locked with a key that can be included. (t02811112)Make sure that you use the correct clutch cylinder so the release bearing doesn't get overfilled. This could lead to oil leaking on...

Fits both ZF and Getrag transmissions with ø28,6 mm input shaft and 10 splines. Example E30, E34, E36, E39 and more.Features Koyo bearings inside.This bearing can not be used with 184 mm clutches as it is too large.