unbranded

Connector for VAG applications, 4-pin (2x2).

Connector for VAG electronic throttle (DBW) pedals, 6-pin.

Connector for VAG flex fuel (ethanol content) sensors, 3-pin. OE reference 4F0 973 703.

Including terminals and seals.

Cooling fan 120mm / 4.7" - 12V Specifications:Fan diameter: 120 mmRotation speed: 1800 rpmFan height: 25 mmAirflow: 56.3 cfmAir Flow (metric): 95.65 m³/h Voltage / Connection:Voltage [V]: 12 VRated amperage: 0.2 AStarting voltage: 2.8 VPower connector: 3-pin fan connector (+ / - and pwm)...

Crank trigger VAG 60-2 60-2 trigger mounted instead of rear oil seal and brings a 60-2 trigger from the supplied digital trigger sensor. MaxxECU takes this signal directly without any external electronics.Connectors not included! Fits Audi 5-cyl engine1: +5v2: Signal3: Trigger GND.

Crimping tool for Deutsch DT type terminals. Four-indent crimp, AWG 16–18 (0.75–1.5 mm²).

Crimping tool for Deutsch DTM type terminals. Four-indent crimp, AWG 20–22 (0.3–0.5 mm²).

Crimping tool for Deutsch DTP terminals. Four-indent crimp, AWG 12–20 (0.5–4.0 mm²).

Lambda Nut M18x1,5 Stainless Steel Lambda nut designed with a curve to fit exhaust pipes without modification. Curved lambda nut follows the pipe contour, allowing for a better welding result. Drill a hole for the sensor and weld it in place, and you're done....

Lambda Nut M18x1.5 Stainless Steel (45°) Lambda nut with a 45-degree angle, curved to fit exhaust pipes without modification. The 45-degree angle is perfect for tight spaces or to move the lambda sensor further out of the gas flow. The curved lambda nut follows...

Dash Vent - V2 This dash vent is openable and rotatable up and down Air hose with inner diameter of 50mm fits on this dash vent. Total diameter is 84mm (3.3 ") Hole diameter 76.3mm (3 ")

Dash Vent - V3 This dash vent is of the grille type and is rotatable up and down Air hose connection dimension 60mm Total diameter is 84mm (3.3 ") Hole diameter 76.3mm (3 ") In the drop-down menu on the right, choose the size...

Decibel insert 2" Material: Steel To be placed inside 2-inch pipework in order to obtain an effective sound damping. Will increase backpressure. Only for temporary use or restricted power output.

Decibel insert 2,5" Material: Steel To be placed inside 2.5-inch pipework in order to obtain an effective sound damping. Will increase backpressure. Only for temporary use or restricted power output.

Decibel insert 3" Material: Steel To be placed inside 3-inch pipework in order to obtain an effective sound damping. Will increase backpressure. Only for temporary use or restricted power output.

Drive train shaft blast protection

Driveshaft adapter bushing 2pcs bushings for Hardy. Fits Alu Hardy Large and Hardy Large to Medium. Narrow part. 29.60 Wide part. 40.30 Height per half. 18.50 Hole. 17.80

Electric water pump Cheva big block Material: T6 AluminumColour: BlackFlow: 132 l/min @ 12vThread hose connection: 1" NPTInlet: 1 3/4" (44.45mm)Consumption: 5.80 AMP The inlet pipe can be mounted on both the right and left side. This electronic water pump removes all unnecessary weight...

Electric water pump Cheva Small block Material: T6 AluminumColour: BlackFlow: 132 l/min @ 12vThread hose connection: 1" NPTInlet: 1 3/4" (44.45mm)Consumption: 5.80 AMP The inlet pipe can be mounted on both the right and left side. This electronic water pump removes all unnecessary weight...